M30 nut soap mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
All the parts needed to create your own M30 Nut soap
- Rating
- 5 / 5
- Likes
- 172
- Downloads
- 124
- Makes
- 1
- Views
- 1,698
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Open Community License v1
M30 Soap Mold
With this model, you can create your own M30-shaped soap using a reusable mold.
Required Parts
2 × side parts
1 × middle part
1 × cylinder part
1 × thread mold part
4 × M4 screws
4 × M4 nuts
Print settings
My soap are made from cold saponification meaning you can print your part in PLA. Also, i used the lower layer height to get the best result.
Instructions
Use the cylinder and the thread mold part with silicone to create the M30 thread.
Let the silicone fully cure.
Slide the threaded insert onto the middle part.
Assemble the two side parts with the middle part and secure them using the M4 screws and nuts.
Pour your melted soap into the mold.
Let it cool and unmold your M30 soap.
This mold is designed for easy assembly, reuse, and clean unmolding.