Captain's key | A ramrod primed silly shell master key for picatinny blasters

Hello! 

the idea for this attachment came to me when i wanted a shorter version of existing masterkey options, i started out wit a string plunger rod system with a pump grip, but ZafC and Null helped me come up with this much simpler and even smaller design. big thanks to those two!

and during prototyping Albe and HuntardX were a great help in figuring out the main body's ideal orientation for strength, which is on its side.

Printing tips:
-since it doesn't use much filament anyways, and the main body is held together by heat set inserts please use at least 4 walls and 20% infill.
-please leave the parts in the orientation they load in with
-supports are only required for the sear overhang on the main body piece and for the trigger guard

Hardware required:
-Standard SLAB Plunger tube (35mm by 38mm by 102.5mm PC tubing is ideal)
-Power spring, ideally K25, springs slightly smaller in diameter will also work
-4x 3x6mm magnets and some super glue for the priming rod and its holder
-18x Voron spec heat set inserts (M3x5x4)
-3x Dash 123 o-rings
-1x Dash 016 o-ring
-9x M3x15/M3x16 screws for the front cap, picatinny clamp, and priming rod cap
-4x M3x30 screws for the rear cap
-2x M3x20 screws for the trigger/sear
-6x M3x6 for the picatinny rail and trigger guard
-0,5x6x15mm spring or similar, within reason