HSW Holder for ZARM Electric Dust Blower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HSW-mounted holder for the ZARM electric dust blower including dedicated storage for nozzles and cleaning brushes.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Two versions of an HSW holder for storing a ZARM electric dust blower and its accessories (3 nozzles, 3 brushes) on a Honeycomb Storage Wall.
Functionally, both versions are identical — they only differ in appearance.
The holder will likely fit similar devices with:
a blower handle diameter ≤ 47 mm
a nozzle connector diameter ≤ 32 mm
The Fusion 360 model is included in case modifications are required.
ZARM electric dust blower reference:
https://www.amazon.de/dp/B0FDGFBNXT?th=1&language=en_GB
Print Settings
Filament: PLA or PETG
Layer height: 0.2 mm
Perimeters: 3 or more
Infill: 15 % or more
Infill type: Cross Hatch, 3D Honeycomb, or similar
Support: Both versions require supports (build plate only); V1 requires more support than V2