1 / 7
[TDM-01] Portal inspired 5L PC case: internal power supply and low profile GPU — image 1
1 / 7

[TDM-01] Portal inspired 5L PC case: internal power supply and low profile GPU

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Thermal Discouragement Mesh (TDM for short) is a minimalist 5 litre mini ITX pc case designed for maximum airflow

Rating
0 / 5
Likes
13
Downloads
57
Makes
0
Views
543
Reviews
0

Updated at source:

Model information

Category
Computers
License
Open Community License v1

[TDM-01] Thermal Discouragement Mesh

(Un)official Aperture Science Hardware Housing

The TDM-01 is a 5-litre sub-compact enclosure designed for test subjects who value high-density computation and superior airflow over traditional "safety standards" or "looks".

Engineered with an Inverted Airflow Architecture, the TDM-01 deviates from standard chassis orientation to prioritize GPU thermal health. By positioning the intake against the high-flow lattice, we’ve ensured your hardware receives a constant stream of unconditioned ambient air.

Through the miracle of additive manufacturing (3D printing), we have replaced useless, heavy metal panels with a high-efficiency lattice. This ensures that heat is actively discouraged from remaining within the chassis, while dust and stray office supplies are actively encouraged to enter it.

Technical Specifications for Authorized Personnel:

  • Volumetric Displacement: 5.0L (Optimized for maximum science-to-space ratio).

  • Neural Interface Support: Mini-ITX Motherboards.

  • Thermal Management: Clearance for CPU coolers up to 67mm in height. (Anything taller is considered a fire hazard and a personal insult to our engineer).

  • Power Input: Flex ATX Power Supply (Because bigger units are for people who lack efficiency).

  • Kinetic Rendering (GPU): Supports lengths up to 182mm (Low Profile only). If your graphics card is longer than this, please consider trimming it with a circular saw or re-evaluating your life choices.


Aperture Safety Warning

The TDM-01 is not a toy. Do not submerge the TDM-01 in Aperture Science Emergency Intelligence Incinerators. If the blue light on the front begins to pulse in Morse code, please vacate the room immediately and wait for a representative from the Department of Paradox Correction.

"We do what we must, because we can (and because it fits on your desk)."

Yes that description was created by ai and I have no affiliation with Valve

BOM

Hardware
  • 33 x     M2.5 x 3.5mm OD x 3mm Deep threaded inserts

  • 33 x    M2.5 x 8mm countersunk screws

  • 4 x        M3 x 4mm OD x 5mm Deep threaded inserts

  • 4 x       standard M3 motherboard screws

  • 5 x       standard course thread pc screws (3 for PSU and 2 for GPU)

Electrical

I will include a blank front panel so you can create different sized cut-outs for USB and power button

Printing Instructions

Global: layer hight: 0.16mm    outer walls: 4    top/bottom layers: 3    infill:  honeycomb at 15-20%

feel free to play around with these... but this is what I used, no support is required!

  • Rear:      Height range modifier: 0-0.48mm and 4.36-5.04mm 0 top and bottom layers

  • Front:     Height range modifier: 0-0.48mm and 5.36-6.12mm 0 top and bottom layers

  • Left:       Height range modifier: 0-0.48mm and 5.36-6.12mm 0 top and bottom layers

  • Right:     Height range modifier: 0-0.48mm and 5.36-6.12mm 0 top and bottom layers

  • Top:        Height range modifier: 0-0.48mm and 5.36-6.12mm 0 top and bottom layers

  • Bottom: Height range modifier: 0-0.48mm and 5.36-6.12mm 0 top and bottom layers

  • Foot x2: 0 top and 0 bottom layers

I have included a threaded insert tester so you can chose the right files based on your printers tolerance, simply print the tester with the numbers facing up, using the same print settings that you intend to use for the rest of the parts, then with a M2.5 threaded insert test each hole, the insert should not be able to be pressed in without heat, if it can then try the size smaller.

Build Instructions

Coming soon™

Tags