Ice cream/popsicle mold with/without stick
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mold for use in the hot summer
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 107
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This mold is specifically designed for the hot summer days.
Recipe for fruit popsicles :
What you need: 1 cup Greek yogurt, 1 cup fruit (by choice), 1/4 cup honey.
Mix all ingredients and blend till' smooth.
Pour the mix in the mold's body (if you use the stickless version of the top cover, don't fill the mold to the brim)
1 If you use the stickless version: put the top cover then add a wood stick trough the hole on the top
4. 2 If you use the other version: put the top cover in
5. Put the popsicles in the fridge and wait
6. Pull them out and rinse them in warm water to loosen up
7. Pull out of the mold and enjoy !
Print tips : Best material for body: TPU; no supports needed (except for the top with a stick) the top must be solid so PLA works just fine. If you have any trouble with assembling the mold, squise the top on it's long side then put the top in