1 / 9
MV-75 (V-280 Valor) with stand and pivoting rotors — image 1
1 / 9

MV-75 (V-280 Valor) with stand and pivoting rotors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

a simplified but fun model of the Bell MV-75

Rating
4 / 5
Likes
21
Downloads
186
Makes
2
Views
769
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Hello again,

Alright... what a saga this project has been.  It probably should have been the V-22 given how many revisions needed to be made and how much of a headache it became.  If you have already downloaded it, I apologize - the original files did work but things were very complicated when it came to putting it all together.  This version will snap together and you only need a little glue to connect the engines to the wings.  Otherwise, it fits together well enough. 

Finally, I designed the rotors to spin using a 693 bearing (8mm OD x 3mm ID x 4mm depth) as these are relatively inexpensive and easy - it's insane to see the rotors spinning as the blades do get so close to the fuselage and they are comically massive - nevertheless, this is the future of troop transport.

If you would rather not have the rotors spin, I did include a printed axle option for you to use (but the blades still need to be printed and placed.

Legacy model pics (maybe I will come back to this beast and try to make the hollow version work, but for now, the solid model reigns)- 

(The above image is of the hollow version with a simple cockpit - ultimately, I found that there was no benefit to this as the windows, despite being thin, turned out to be opaque.  There are some sanding marks as this is pre-paint. Currently, I am printing the solid version and will update when I can)

 (you can see some of the window inserts here)

(and the solid option prior to any sanding or the installation of the engines)

Tags