1 / 2
Octopus Pro Fan Mount for Threaded Inserts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the Octopus Pro Mount for DIN Rail Bracket & Fan Mount with Threaded Inserts in mind
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This is a remix of the Octopus Pro Mount for DIN Rail Bracket & Fan Mount. I made the fanholes 4mm wide and the body 6mm thick so I could use my M3 Ruthex threaded inserts. The fans I've mounted on the top so I could use M3x40mm screws. I used the original spacers with a length of 30mm.
If somebody is interested, this is what I've added in the printer.cfg so they will run at 60% when one of the steppers starts up
[controller_fan stepper_drivers]
pin: # Change this
max_power: 0.6
kick_start_time: 0.5
stepper: stepper_x, stepper_y, stepper_z, stepper_z1, stepper_z2, stepper_z3