1 / 1
Abschlusskappe Elektroinstallationsrohr 20mm/25mm mit Kabel — image 1

Abschlusskappe Elektroinstallationsrohr 20mm/25mm mit Kabel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Abschlusskappe für ein Elektrorohr mit bereits eingezogenem Kabel

Rating
0 / 5
Likes
6
Downloads
15
Makes
0
Views
101
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Abschlusskappe für ein standart Elektrorohr mit 20 oder 25mm Außendurchmesser mit einem einem eingezogenen 4mm oder 5mm Kabel.

Zum Drucken die beiden Teile mit einem leichten Abstand platzieren. 

und nachdem das Kabel eingezogen ist, aber bevor es zu stark gespannt ist das Kabel mit den 2 Teilen einfangen und zusammengesteckt in das Rohr drücken.

English description:

End cap for a standard electrical conduit with an outer diameter of 20 or 25 mm, containing a pulled-in 4 mm or  5 mm cable.

When printing, place the two parts with a slight gap between them.

After the cable has been pulled in, but before it is under too much tension, capture the cable with the two parts and press them—assembled—into the conduit.

Changes

  • 21.2.2026: Original war für 4 mm Kabel, 5 mm Kabel Variante hinzugefügt

  • 21.3.2026: 25mm Rohr Variante hinzugefügt

Tags