Skadis hexagon board with interconnection system
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hexagon with a Skadis hole pattern that works well with Skadis accessories that can fit inside a single tile.
- Rating
- 5 / 5
- Likes
- 974
- Downloads
- 1,798
- Makes
- 3
- Views
- 10,522
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
A hexagon with a Skadis hole pattern that works well with Skadis accessories that can fit inside a single tile. The tiles can be connected together with the included connector to form a pattern of multiple tiles. Connecting the tiles together allows for saving on screws needed, meaning 4 screws can hold several tiles safely on the wall.
The tile is designed to print on a MK4/Core One sized bed.
Note: The holes on each tile does not line up with the holes on the next tile, so you are unlikely to be able to use multi-tile accessories.
Material used: Any particular should work, but PLA or PETG would be best.
Support: Yes, enable support on build plate only because the indentation for the screw holes.
Print parameters: 10% - 15% infill (eg. grid pattern is fine), 0.20mm layer height.
TIP: If you want to cover the unused screw holes, leave the support in (and don't use organic support).
Changes 09.02.2026:
Made the hole for the screw head larger
Added a small cover for the screw head
Changes: 26.02.2026:
Make the connector to connect boards together slightly shorter to make them easier to fit.