8x12 sign mounting plate, pole or tree mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plates for 8x12 metal sign (actually 20 cm wide) so you can use a single screw to mount via top and bottom,
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Long story short, purchased a silly 8"x12" metal sign (actually 200mm wide), wanted to tree mount but did not want to deform sign by screwing into tree using corners or making central holes. Made adapter plates to I could use existing screw holes (183mm apart) to mount to plate and then use single central hole on new adapter to (basically) pole mount. printed two, one for top and one for bottom. Created two styles, one with a round screw hole and another with oval hole that should allow sign to move slightly as tree grows. Used washers to also allow a little extra flex.
I personally printed in PETG.