Bookshelf Bracket (Combiner)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
About the model:
Have you ever wanted to stack some cube bookshelves on top of each other? I obviously didn't want the top one to slide around and fall off, but I also wanted to easily split them apart again. Hence this bracket. Simply slip these on to all four corners and they should lock the shelves together reasonably well.
These are designed to fit cheap cube shelves with a wood thickness of 13 mm.
Warnings
Do not use these to secure shelves a child might climb on. I also would not recommend using them to secure shelves above head height. You don't want to rely on them to secure heavy loads, they are just plastic and are designed to be removable so could come off if disturbed.
Print Info:
No supports
0.2 mm Layer height
PLA+
Prusa i3 Mk3
Print time of ~2h6m
Liked this model? If you are able to, you can support my work here: https://ko-fi.com/purposefulcreation
Have a wonderful day! :)