Prusa Mini Letter Inserts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Letter inserts for the Prusa Mini,
- Rating
- 4.778 / 5
- Likes
- 94
- Downloads
- 648
- Makes
- 6
- Views
- 3,442
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Letter inserts for the Prusa Mini,
Print instructions
Make sure you adjust the XY Size Compensation I used a value of -0.1 and the elephant foot compensation of 0.15 and it printed fine. These letters will be slightly too big if you print them as is. I printed mine upside down on the textured plate but I also would have on the smooth as I like the appearance of it a little better. Super glue them in place and use a black sharpie if the superglue leaves any white residue around the letters. Use tweezers and if you're impatient like me then use some accelerator to speed up the process.
Category: 3D Printing