Linked Dipole Wago Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a bracket that holds the Wago 221-2401 wire connector. This bracket has strain relief holes to connect wire
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a bracket that holds the Wago 221-2401 wire connector. This bracket has strain relief holes to connect antenna wire to the bracket without any need for mini carabiners or other hooks, etc. The holes are sized for the popular wire BNTECHGO 18 AWG used for SOTA and POTA wire antennas. This can be used for EFHW, dipoles, etc. See the slack nuts design I am also uploading to help manage extra antenna wire that may be used for slight adjustments to antenna lengths for tuning. This design is specific for PETG prints. Your mileage may vary with different materials, and variation due to different printers, settings, etc.