1 / 1
Long divider for 2-drawer Milwaukee Packout toolbox
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the long divider for the 2 drawer Packout toolbox
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 28
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is the long (front-to-back) divider for the 2-drawer Packout drawers. There are two versions -- the one piece version may warp a bit at the ends unless you have really good plate adhesion. The split version is the easier version to print, and really has no downside.
Print in the default orientation of the STL (upside down). Use a brim if you have any doubts about your build plate adhesion.
All the drawer dividers:
Thanks to download and ❤!