Wardrobe Handle Replacement - 130mm Hole Spacing

# Ergonomic Wardrobe Handle Replacement (130mm)

## 🛠 Summary

Did a handle on your wardrobe or kitchen cabinet break? This is a sturdy, ergonomic, and modern replacement designed to last. Unlike many decorative handles, this model features a reinforced structure to withstand daily use.

The design is specifically tailored for furniture with a 128mm (approx. 130mm) distance between screw centers. Please verify your furniture measurements before printing.

---

## 📐 Technical Specifications

* Hole-to-Hole Distance (C-C): 128mm.

* Screw Compatibility: Designed for standard M3 or M4 furniture screws.

* Design: Ergonomic curved grip with a hollowed back for optimized strength-to-weight ratio.

---

## ⚙ Print Settings

To ensure this handle doesn't snap under pressure, please follow these structural recommendations:

* **Material:** PETG or ASA are highly recommended for their mechanical properties. PLA can be used but may be more brittle over time.

* Orientation: Print the handle on its side (horizontal). This aligns the filament layers with the pulling force, making it much stronger.

* Perimeters (Walls): 5 or 6 (This is more important than infill for strength).

* Infill: 40% (Gyroid or Grid).

* Supports: Needed only for the small overhanging areas near the screw mounts depending on your printer's bridging capabilities.

---

## 🔧 Installation

1. Remove the old handle.

2. Ensure the screw holes in your furniture are exactly 130mm apart.

3. Use the original screws or standard furniture M4 bolts.

Note: Do not over-tighten to avoid stressing the 3D printed plastic.

---

## 📄 License

Creative Commons - Attribution - Non-Commercial

If this saved your furniture, please consider uploading a "Make"! Seeing your photos helps me improve my functional designs.