1 / 2
Modification of topology optimized shelf bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I removed the part between the two wall contacts and I added a bit material near the top one. Also, I've made an…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 89
- Makes
- 0
- Views
- 504
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I removed the part between the two wall contacts and I added a bit material near the top one. Also, I've made an adapter "jacket" for 3,5mm countersunk screws to be used because the angle is too steep in the original design and hole size is originally 5mm.
Category: Organization