Tradfri LED driver Wago 221 mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Mod changes the power inlet of the Tradfri LED Driver to an Wago 221 connector
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Mod changes the power inlet of the Tradfri LED Driver to an Wago 221 connector. You'll need 2 Wago 211-2411 straight connectors.
I printed it in ASA Prusament.
This mod should be only used if you're trained and feel confident to tinker with mains power.
First you'll have to break the crimp from the large white power connector from IKEA. If you don't cut the cable, the cable length should be sufficient to connect the WAGO connector. If you need to cut the cable you'll have to solder in new cables.
The WAGO connectors should be able to open once you closed the housing halves.