Wall mount for Bosch BC330 12V charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds Bosch BC330 12V battery charger horizontally to provide proper charger ventilation.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 15
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I was looking for a bracket to mount Bosch BC330 charger on a wall in my garage. The designs I found offered mounting it vertically. There are two problems with this because the charger was not designed for such application: (a) the battery does not stay secure and can fall; and (b) the ventilation wholes are at the bottom and the top only, therefore it may not properly get cooled during the operations. If the charger would allow for vertical usage, it would have corresponding mounting holes. But it does not.
So, my solution is a shelf with a recess to secure the device. The shelf has a hole to allow proper air convention.
Since the shelf may potentially get relatively hot from the unit while charging, I printed it with Flash Forge PETG-CF. Since it is CF, I used 0.6mm nozzle. Printed upside-down with normal supports.