1 / 2
Rock-Ola Tempo II Jukebox Record Arm Gear — image 1
1 / 2

Rock-Ola Tempo II Jukebox Record Arm Gear

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement for the main record arm gear in the Rock-Ola Tempo II jukebox.

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Public Domain

This is a replacement record arm gear for the 1960 Rock-Ola 1485 Tempo II Jukebox. Why spend over a hundred dollars on a metal replacement when you can print one for pennies?

I don't know how much force this gear takes, but the old one was stripped pretty badly. I printed this out of carbon fiber reinforced filament and I'd recommend at least four walls so the teeth are made entirely from walls, then fill in the rest with 100% infill. Maybe you can get away with less, maybe you can use PETG or even PLA instead, but I didn't want to risk stripping the gear and having plastic shards fall into this machine.

The center spindle is a little loose and the screw holes are a little tight, so you might consider using a tapping kit in order to get the screws in. The idea is to allow you to easily remove the gear if it ever wears down and you need to print another.

Tags