1 / 4
Voronoi vase with watertight insert
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Assymetric low profile vase with watertight insert container. Example of print postprecessing by salt remelting.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Realization created as follows. Outer part printed solid with purple PLA. Remelted in salt powder in approx. 180C internal temperature (it took about 2h to reach). Be careful with temperature, PLA easily burns. After this, can be cooled in 1-2h until reaches ~80C to take out part. Internal insert printed with 2x 0.6mm wall 0.8mm bottom and no top. To fit the insert it can be partially filled with boiling water to make it softer.