1 / 1
EDC 1/4" Bit Driver - Magnetic Retaining And Internal Storage For 2 Bits
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact and elegant bit driver for your keychain or general EDC needs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Some assembly required. You'll need CA glue and a 6mm x 2.5mm circular magnet. Magnet is a press fit into the base of the hex that hold the bit. Tab for a split ring needs to be glued into a corresponding slot on the screw on cap.
Support and a brim or raft is absolutely required when printing. For good quality threads I printed with a 0.16mm layer height with a 0.4mm nozzle, and had good results. Printing in ABS or a similarly tough polymer (PA, PC, ASA) is recommended for long term durability, but PLA will also work.