Wear protection panels for entryway bench
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple 90 degree protection panel, to protect hardwood top from wear when tying shoes
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 21
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
Simple 90 degree protection panel, to protect hardwood top from wear when tying shoes
Required hardware:
Whichever filament you prefer, something that's not too brittle might be good so it doesn't break due to use.
VHB tape. Put a strip on the back of the part facing the build plate, and attach tape to the front of the slab.
Current versions:
Currently there are two versions:
150x25, 150 mm wide made for tops that are 1" or 25 mm thick
150x20, 150 mm wide made for tops that are 20 mm thick
Let me know if you need a different measurement.
Printing instructions:
Print as placed with no support.
Note:
Posted model comes with magnet holes. If you require a different base, drop a comment, or use the rebasing tool of your choice.