DIN Rail Prototyping Stand V02
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a stand when used with some DIN Rails makes a useful electronic prototyping rig.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 30
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a stand when used with some DIN Rails makes a useful electronic
prototyping rig. You will be able to move your prototypes easily with it. Feet
are also provided to tilt a bit the stand (15 degrees). You will find on
Thingiverse or Printables many accessories. Search for DIN Rail.
M4 nuts and bolts are recommended for assembly. You will need 2 x 8 mm and 2 x
16 mm bolts if you are using the feet. Otherwise, 4 x 8 mm will be required.
You will need to print 2 of each. Minimal support material touching the plate
is needed for the rail holders. Print them upright. None is required for the
risers. An infill of 20% is recommended.
This object main web page is:
http://www.ctheroux.com/din-rail-prototyping-stand-v02/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.