IKEA UPPATVIND ceiling holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
IKEA UPPATVIND used as circulation system in a ceiling
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
We had moisture problem in a room of our flat. The moisture cames throught the suspended ceiling and the wall.
After renovation we wasn't sure that all moisture was gone. I decided that we needed a circulation in the ceiling.
So i tought that a IKEA UPPATVIND could help us with the circulation. The idea was that the UPPATVIND get the air from the upper part of the ceiling. Then it filter the air and blow it with the moisture in the room. I made a hole in the ceiling and designed a frame with a holder for the UPPATVIND.
You need 8x M3 heat inserts and 8x 8mm or 10mm M3 screws.
Printed in PLA
Layer 0.2mm