Disobey 2025 (2026!) badge - Better switches, better life
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The badge was designed to not use mechanical switches. Unacceptable.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a participation to Disobey 2026 badge hardware mod contest! A 3D-printed plate to hold Cherry MX -style switches, with enough space for soldering. The file is created from the STEP-files that are available on the Disobey's website.
Story behind the mod
I quickly looked at the STEP-file, that was provided before the event and noticed something awful. Yep, you probably noticed it as well. Alps SKPMAME-010 switches. Eww. I thought we were friends. This is a gamepad.
Everybody knows that SKPMAME-010 switch is not optimised for GAMING with their 1.57N actuation force! To ensure the gaming-optimal switch and advantage in the event against newbs, I had to do something. And now here we are!
Considerations
Since this is created by using the STEP-file and the 3D-print has not been tested with a physical badge, take these into consideration:
The print / mod is attached to the badge with tight tolerances, good intentions. thoughts & prayers
Requires desoldering of original NON-MECHANICAL
AWFULALPS-switches and soldering some wire directly to MX switches' legs🚨You might break your badge by doing this mod!🚨
I wouldn't hold me responsible for this, since you trusted a random person's
💩postmod in a hacker conference and decided to do it to your badgeBy doing this mod, you hold full responsibility on what happens to your badge!
Installation
Print the model
Desolder original
awfulAlps-switchesPick your favorite MX-style switches
Creator's recommendation: Mint Chocolate Chip POM switches
Solder jumper wires to the pads but not to the switches!
Put the mod into place and hope that it fits
Solder the switches' feet into the jumper wires you soldered earlier
Pwn or whatever you use the badge for
Shoutouts
Disobey badge team <3
LeftOvers - The most successful non-profit hacking team in Finland*
Sources
STEP-file for badge: https://github.com/disobeyfi/disobey-badge-2025-game-firmware/blob/main/docs/hardware/disobey_badge2025.step
Disobey badge website: https://badge.disobey.fi/2025/
*) Citation needed