Ammo Box 20 for .338 Lapua
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ammo Box with sliding lid holding 20 cartridges in .338 Lapua
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Requires two magnets 5x3mm to keep lid in place when closed (https://www.amazon.de/dp/B0FYWW6228 e.g.).
Clearance between box and lid is configured as 0.2mm. Depending on used printer, filament and settings lid could be a bit loose. But I decided to keep 0.2mm since with 0.1mm on Snapmaker lid got stuck and needed some postprocessing with sand paper.
Testprints:
Prusa MK3S + Prusa Jet Black PLA: fits with 0.2mm
Prusa MK3S + Prusa Army Green PLA: bit loose, 0.1mm were better
Snapmaker 2.0 + Snapmaker black PLA: fits with 0.2mm
Constructed from the scratch as parametrized box in SOLIDWORKS for Makers