EG4 Flexboss21 Extra Cooling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The EG4 Flexboss has a tendency to run warm when fully loaded down with PV input. Not anymore.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 1
- Views
- 115
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This model was roughly based on wpn's previous work (linked above), but I modified it fairly substantially for my wants/needs.
My parts list is as follows: 3x 140mm ARCTIC P14 Pro PST CO case fans (https://www.amazon.com/dp/B0DPX4TWW7), 1x 4pin PWM Fan extension cable, 1x Dust filter roll for PC case, 10x 10mmx2mm magnets, 1x 12v stepdown transformer (https://www.amazon.com/dp/B0CZLBLDZT), 1x JPF4816 Chassis Fan Speed Controller (https://www.aliexpress.us/item/3256807127409879), 1x Ultra-thin Temperature Sensor (https://www.aliexpress.us/item/3256805207808532), Some extra 22awg cable for the power connection.
You need to print 2 of each connector if you want some additional strength.