Moving Head Spotlight
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I redesigned the head, to give the moving head a look like a spot light and designed it to look similar to the Eurolite tmh-s60. I think it fits almost any small moving head spot with manual focus. If you need a different design, let me know it.
The arm and base joint might by loose, but you can glue it in position the way you want. The head moves freely, as in the original model.
To print it, supports are needed under the connection pin between arm and base, the rest should work fine. If you sink the head part into the bed in the slicer, the flat bottom should be round and look more like a fan, as they have sometimes, but it might not be necessary to print it.
If you want to use it as a keychain, like I did, scale down all parts to 30%-80% and glue the keychain support under the base.