Friendly Articulated Slug (ezbrim)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easily printable version for those having issues. Moved this from thingi, about 20 makes over there.
- Rating
- 4.808 / 5
- Likes
- 271
- Downloads
- 3,028
- Makes
- 40
- Views
- 7,434
- Reviews
- 26
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Share Alike
This Friendly Articulated Slug is a remix of thing:4727448 by Isaiah that allows easy printing with default settings by adding a simple brim that connects all the parts on the bottom and just peels off once you finish printing.
I created this after failing to print the default model after 4 tries due to layer adhesion of the tiny bottom parts. I use a heated build plate, but never use additional adhesive. I tested this by printing at 100% scale with 0.4 and 0.25 nozzles with default PLA config on Prusa MK3S+ successfully.
If you are using a typical 0.4 mm nozzle you may want to try turning down 'Extrusion Multiplier' in PrusaSlicer Filament settings to 0.90 (90% flow in Cura). Most people are over extruding which won't affect 99% of prints but ones like this slug which require perfect tuning need to extrude less filament to work correctly.
If you have a 0.25 mm nozzle you should use that and it will work without issues.