1 / 1
RS-25-5 Wire Tie Point
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides a convenient tie-down point between an RS-25-5 PSU and a Raspberry Pi in a Voron 2.4 build.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 27
- Makes
- 0
- Views
- 596
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The DIN mounts in the Voron 2.4 R2 build increase the separation between the electronics and the DIN rail. Given the additional height, it didn't make sense to drop the wires to the panel to tie them off, so I made a tie down point along the line between the +V/-V on the PSU and the GPIO supply point.
If I remember correctly, I used one of the M3x8 SHCS from my kit and a small 4" zip tie.