Simple Paracord Knot Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple jig to use when tying paracord keychains. You will need three M5 Cap Head machine screws (ø5 mm, head ø8.5 mm)
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 111
- Makes
- 1
- Views
- 646
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A simple jig (tying board) to use when tying paracord keychains.
You have several places to place the screws depending on how long keychain you want to make.
If you need to tie longer bracelets you could try to print two (or more) and glue them to a long board.
You will need three M5 Cap Head machine screws (ø5 mm, head ø8.5 mm).
Or you can print the screws. I have included 4mm and 2mm pegs. The latter need to be printed laying down for increased strength.
Use 3 perimeters and consider extra infill around the holes.