1 / 1
Modular Makeup Brush Organizer System (Interlocking)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two different sized holders designed to accommodate a variety of brush sizes.
The "puzzle piece" connector design allows you to link as many holders as you need in a single row. Whether you have 3 brushes or 30, you can print exactly the number of slots you need and organize your brushes off the table.
Print Instructions
Material: PLA or PETG (I used PLA).
Supports: No supports required. Print flat on the build plate.
Infill: 15-20% is sufficient.
Layer Height: 0.2mm standard
Wall Loops: 2-3 walls for strength on the connectors.