1 / 5
Air Duct Valve for 120mm Fan for 3d Printer Cabinet Ventilation — image 1
1 / 5

Air Duct Valve for 120mm Fan for 3d Printer Cabinet Ventilation

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is remix and merge of 2 models from Thingiverse to create a one-way air flow valve for an exhaust flexible duct.

Rating
0 / 5
Likes
15
Downloads
57
Makes
0
Views
541
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Share Alike

Model is designed to interface between a 120mm fan and a 120mm (~119 Inner Diam) flexible duct for the purpose of ventilating my Core One cabinet fumes through a window whilst blocking any external wind/rain from entering into the ducting. The one-way shutter valve is to allow airflow towards the mounted extraction fan from the flexible duct. (I have included a reverse flow model as well if that is your configuration need).

(Note: My extraction system was in place for previous printers and although the Core One has Fans to push the air through I will be still using the 5V 120mm Fan to ensure a negative pressure in the duct so fumes/particulates shouldn't escape at a leaky joint.)

I have printed mine in PETG (0.4mmNozzle & 0.2mm layer height). Supports will be needed (see slicer photo), Care is needed removing the supports on the thinner sections.

The Flap parts need to be sprung into the respective holes, PETG is better for this. Make sure the holes are clear of any support material.

I may put an additional design up to handle 125mm ducting (120mm duct may be hard to source...) or you could find some strip foam to pad this model out to fit. (edit 11 Mar 2026 - have included 125mm option, it is untested so if someone prints let me know how it fits 125mm flex pipe thanks)

In the photo the part that mounts the fan to the window blanking plate is at https://www.thingiverse.com/thing:2267574 however I am in the process of redesigning it and will publish (on Printables) shortly. (edit 18 Feb 2026 - update now published see below)

Related model

Tags