Kobo Glo face
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A face of my old Kobo Glo e-book reader got broken. So I modelled it.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A face of my old Kobo Glo e-book reader got broken (plastic degraded over time and is very brittle now). So I modelled it.
You will need original parts from your existing face cover: power switch (two parts + spring), light button, LED diffuser and 3 melting nuts. In addition, you will need two sided sticky tape (I used 0.3mm x 5mm and 0.3mm x 10mm).
You will need to melt in the nuts and possibly slightly adjust hole for light button with modelling knife.
I printed it in white PLA, however do not really like results as the face is quite thin and you can see black tape through it. So I will probably print it in grey or black.
Not sure if anyone need this as the reader is very old.
P.S. I did not modelled back part yet. May be in future.