Faucet Knob
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.83 – €1.02 net (excluding VAT)
For file: KraanKnop-7.5mm_0.4n_0.1mm_PETG_COREONE_54m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.93 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 54 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Faucet knob with different fitment sizes, heat-up the gears on the faucet and then push the knob on.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Needed a new faucet knob behind our bar and designed this simple one. the drawings are attached you can simply change the diameter of the hole however needed.
Printer settings
Use PETG, ASA or ABS for best (and lasting) result
0.1 Layer height
minimum of 5 perimeter walls
Gyroid infill of at least 15%
Installation
Heat up the extruded faucet, I used a torch (use at your own risk lol), halfway in one of my prints the print failed, i used that part to check if it was hot enough.
When heated enough gently push the knob on the faucet. Pour some water over the faucet to cool it down.