Minimalist Wall-Mounted Kitchen/Paper Towel Holder (SLIM)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A compact kitchen towel holder designed to mount neatly on the wall or inside a cabinet
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 55
- Makes
- 1
- Views
- 215
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimalist Wall-Mounted Kitchen Towel Holder
A compact kitchen towel holder designed to mount neatly on the wall or inside a cabinet. The system uses two fixed mounting brackets and two removable press-fit stub axles that support the roll and allow smooth rotation.
To load a roll, press a stub axle into each side of the paper towel core, then rest them onto the mounted brackets. The roll spins freely while remaining securely located — no long rods, springs or mechanisms required.
Ideal for saving counter space while keeping towels within easy reach.
Features
Minimalist, Ultra low-profile design
Wall mounted
Removable press-fit stub axles
No springs or complex moving parts
Smooth rotation for easy tearing
Designed for standard kitchen towel rolls
Both parts print without supports
Printing Requirements
Print 2 × mounting brackets
Print 2 × press-fit stub axles
No supports required
Print brackets with strength in mind, on it's side (3+ perimeters recommended)
PLA or PETG recommended
Mounting hole sized for standard screws
Assembly
Press the stub axles into each side of the towel roll. Use this as a guide for spacing
Mark, drill and mount the brackets.
Place the roll onto the brackets.
Simple, sturdy, and space-saving.
Tip: The brackets use 1 screw each for minimal drilling. To ensure that the brackets wont rotate, you can place a piece of double sided tape/sticky pad between the shelf and bracket before fixing with a screw. But for me the screw alone has been more than sufficient.