Elegoo Centari Carbon Fillament Sensor Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer to help mount the filament sensor when using an internal spool
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 30
- Makes
- 1
- Views
- 257
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Reduce the strain on your internal Filament tube with this handy spacer.
Designed to mount to the original filament sensor holes on your Centauri carbon (you can even use the same M3 bolt).
PRINT NOTES: This model must be printed on its side, this is so the slot can be formed with no supports inside. This will cause supports to be made inside the holes but they are easy enough to break out with a screwdriver or similar.
I printed this in PLA-CF but if you are going to be maintaining a hot chamber I'd recommend something more heat resistant.
A heat set M3 brass insert is needed in the bottom hole or you could use a nut
Category: 3D Printer Parts