Modified Tamiya masking tape holder with finger notch (6/10/18mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified Tamiya masking tape holder with finger notch to help starting a new piece of tape.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 31
- Makes
- 1
- Views
- 416
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tamiya recommends using the tape dispenser "backwards" so it cuts the backside of the tape, and you can stick the loose end to the rear of the dispenser across the circular notch.
I prefer to use the dispenser the other way around, but the side of the dispenser next to the cutter is flat, so getting a new piece of tape started is awkward. So I made these models based on the Tamiya design.
This uses the same transparent top plate and the plastic cutter blade from the original Tamiya dispenser.
Includes all three sizes - 6 / 10 /18 mm