Shortened Filler stand for short rollers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is just the original Filler stand with the feet shortened by 25mm to use less filament and look less weird.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 277
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is just the original Filler stand with the feet shortened by 25mm to use less filament and look less weird when using shorter remixes like this one: https://www.thingiverse.com/thing:4930977
Print Settings
Printer:
Kingroon KP3S
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.28
Infill:
20%
Filament:
Inland ABS
green
Notes:
I used traditional supports placed everywhere so that the cutout holes were nice and pretty. If your printer is good with bridges or you don't care how it looks, then you can skip them.
Category: 3D Printer Accessories