Officer Merdeka from PEPPERED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The loveable stern faced officer from PEPPERED: An existential Platformer, now in 3D! Sculpted in Nomad Sculpt.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
The loveable stern faced officer from PEPPERED: An existential Platformer, now in 3D!
FAIR WARNING: This is an Organic Model. As much effort has been put into making it FDM friendly, supports are still mandatory for printing.
Minor sanding might be needed to make parts fit as nicely as possible due to tolerance.
Attach everything in place with superglue. It should be fairly obvious where parts go onto.
If you are into handcrafts, sand and prime like you would normally do before painting. It is recommended to sand everything over lightly with rough sandpaper for the best appearance possible. Especially due to the support residues.
A complete version of the model is also available if you would like that for some reason.
Supports: Tree support, strong
Walls and infill: As you like, typically recommend 3 walls and 20% infill, outer walls first for better appearance.
For the ears, use wide brim and slow print speed to prevent wobbling over. If that fails, try printing it face down.
Have fun!