1 / 8
Mechanical ventilation
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Air is vented from the printer chamber through a fan-assisted window.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 19
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To remove contaminated air from the printer chamber, I installed mechanical ventilation. I used a pre-made model to exit the chamber. https://www.printables.com/model/1233888-prusa-core-one-rear-ventilation-mount-3in-4in-hose
I used a 100mm diameter hose, and to connect it to the fan (red), I used four M3x35mm connectors. The final element is designed to fit a tilted window, allowing the window to be slightly open.
Height: 0.4mm, nozzle: 0.6mm Material: PETG