3Dsets Sakura rear lights for LED filament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rear lights for 3Dsets Sakura model 17 with two slots for 2mm LED filament
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 15
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
3Dsets cars are amazing as designed, but with real lights even more. I made a rear lights for Sakura with 2mm slots for flexible LED filament form Aliexpress. It can be bended and freely cut for reasonable price.
Print the first two layers with transparent filament and the rest with black. I did both from PLA. Concentric pattern is transparent enough.
The holes in tail panel must be a little bit widen for better cable management (to put the connetor through it).
In Aliexpress search for "COB LED Flexible Filament Free Cut DC 3V". For inner slot 80mm is sufficient, but for the outer slot, I would recommend longer. I bought the 80mm and there small but visible gaps. I wired outer "C" as a side light, and the inner "C" as a break light. I used 47Ω for side light and 22Ω for break light to be a little bit brighter.
I added connectors for easier disassembly in the future.