IKEA Ivar - Extra stretcher holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple model that rely on IKEA Ivar's peghole layout to add additional stretchers for various purposes.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Share Alike
Needed to add additional stretchers to the sons Ivar wardrobe and thought to re-use as much of the furnitures existing options.
Print two holders and either use pegs from IKEA or print the ones I added here, each holder require four pegs.
Print pegs on the side, they are not perfectly round but instead flat on two sides to make printing easier.
There are two sizes of holders available, the sizes refer to dimensions of the wood that is added between the holders to create a stretcher.
Insert pegs into the holder/s and then insert the holders into the peg-holes in the IVAR shelf. Then insert the stretcher wood into the holders, it should be a snug fit.
The wood should be cut to approximately 39.5cm (space between back and front verticals are ~43.5 and holders have 2mm back material), please measure twice and cut once.
Print settings:
Walls: 4
Top/bottom layers: 5
Infill: 15%
Supports: No