1 / 7
#003 Planter/Utensils holder Mold For Casting (Polimer Casting)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple model for holder or planter.
- Rating
- 0 / 5
- Likes
- 39
- Downloads
- 95
- Makes
- 0
- Views
- 555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Simple model to produce planters or utensils holder
Made to be used with polimer plaster I use some 65 Mpa which is strong.
Currently no real images because I'm printing it. But it will work well.
EDIT: I printed it and worked well, sadly I run out of material because its pretty big. So let's say it's only for plants or utensils holders.
Required hardware: 12 M6 screws with nuts or smaller with washers
Gasket should be printed in TPU - not required for mold to work.
NOT MADE WITH AI