Le Poisson Steve the Fish Clutch Purse
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Le Poisson Steve fish purse (clutch style). He is orange, he has arms and legs. Based on the video by Vigz and tomo.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Share Alike
1.75 mm PLA filament, using .4mm nozzle and Walmart bargain mesh, I printed using a single color on a Bambu 3D Carbon X-1 printer, and Bambu filament. I have had success with other printers and other PLA filament using the following method. The printer was paused after the first layer and the mesh added (2 pieces of mesh covering the build plate with their length double the build plate width, the mesh was doubled up for durability and the seams are overlapped ).
Mesh is secured with magnets to the buildplate. The printer is allowed to resume the print with no other modifications.
Supports: I only recommend supports for the keychain loop on the main purse. NOT build plate only, and adjust the z gap to be larger, this is a delicate part that breaks easily when removing supports, but otherwise is great for a set of keys.
Purse Assembly:
Trim excess fabric around the body and strap holes of the purse body leaving extra fabric around the sides of the purse bottom and tails. Add non-stretch lining fabric (like quilting cotton/calico). Hand tack through all fabric layers, although I doubled up on the fabric so that the pattern side was visible both inside and outside the purse.
I used fishing line & beads to secure the sides of the purse and used extra fabric folded over as a secret pocket.
I used a fancy ribbon as a handle.
Customize your fish to your fancy.