Backgammon with magnetic hinges
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Decent size bagammon set
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 31
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
Read more about about this print: https://www.funkyton.com/print-your-own-backgammon-set/
Scaled up 50% in width and depth, with a custom height. Holes made for 4x2mm magnets. Based on @Modellaner's version.
Required print volume: 155mm x 250mm
Full board size: 242,5mm x 306mm x 13,5mm
Tiles can be squeezed in to a very tight friction fit, however this will cause stress on the plastic. I inserted the green tiles with force, but decided to sand down half a millimetre of the bottom of the red tiles, and it was still a tight fit. You might have to fiddle a bit around with these depending on your printing resolution and type os plastic used.
For more designs visit: https://funkyton.com/tag/3d-printing/
Category: Games