Hidden Blade Reliquary :Kingdom Come: Deliverance 2 :Philips OneBlade 360
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
KCD2-inspired medieval casket with hidden hinge. Support-free print with secure magnetic closure, travel-ready.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 11
- Makes
- 0
- Views
- 334
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Description
The Hidden Blade Reliquary is a KCD2-inspired medieval casket designed to house modern essentials within a solemn, architectural form. Inspired by the quest of Sir Valentine in Kingdom Come: Deliverance, where the Sword of Sir Valentine ultimately breaks, this reliquary reimagines that narrative as preservation — solemnly safeguarding a blade of legendary stature: the OneBlade360.
The model consists of four main components: the lid, main body, inner compartment, and a fully concealed hinge system. The hinge is structurally integrated, preserving a clean and uninterrupted silhouette while maintaining durability.
Despite its monumental appearance, the design is optimized for practical FDM printing. It prints support-free and assembles with minimal hardware.
Required hardware:
2 × M3 × 40 mm hex bolts
6 × Ø6 × 3 mm neodymium magnets
Assembly Instructions
Note: The photos show the previous inner compartment.
The downloaded file contains the updated version with corrected dimensions.
Step 1
Confirm that all parts are included:
Main body (bottom section)
Inner compartment
Lid
Two hinges (left and right differ)
2 × M3 × 40 mm hex bolts
6 × Ø6 × 3 mm neodymium magnets
Please remove the custom supports and clean off any burrs before use.
Step 2
Assemble the hinge first.
Insert the M3 × 40 mm bolt from the side with the hole. Once it reaches the internal stop, tighten it securely.
Do not overtighten, as this may restrict hinge movement.
Step 3
The shorter hinge piece is for the lid.
Align it with the guide slit in the lid and slide it into place.
Step 4
Press the hinge firmly into the lid first.
If printed in PLA, the hinge may crack during insertion. PETG, ABS, or ASA is recommended for improved durability.
If this step is completed successfully, PLA should function adequately.
After installing both lid hinges, insert the corresponding hinge parts into the main body.
Step 5
Press the neodymium magnets into the main body first.
To ensure correct polarity for the lid magnets, attach each lid magnet to the corresponding magnet already installed in the body, then firmly close the lid.
This automatically aligns the polarity during installation and ensures secure closure.
Step 6
Insert the inner compartment to complete the assembly.
Final Note
Separate 3MF files are provided for both the Snapmaker U1 and the Bambu Lab A1, each optimized for its respective printer.
I am excited to participate in this contest and hope to make my Prusa debut through it.
⚠ Update Notice
The inner compartment was created with incorrect real-world dimensions, which caused a sizing mismatch.
It has now been redesigned and replaced with the correct dimensions.
All other parts remain unchanged and are fully compatible.
If you downloaded the previous version, please re-download the updated file.
Apologies for the inconvenience.