Prusa Mini Raspberry Pi Model 3 A+ & RPi 4 Mounted Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was looking for a simple solution to mount the RPi Model 3 A+ to my Prusa Mini but could not find any low profile…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 223
- Makes
- 0
- Views
- 3,571
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
I was looking for a simple solution to mount the RPi Model 3 A+ to my Prusa Mini but could not find any low profile solutions. So I made a quick modification to one and used the below parts:
Parts Needed to Mount the case
- (2) M5 x 10mm bolts
Parts using in this kit are from the following kits:
- Bottom Case by Adafruit (see downloads for modified STL) https://www.thingiverse.com/thing:546427
- Top Case by pteppic - https://www.thingiverse.com/thing:3670653 or if you are not planning to use a fan try out my remixed version in the model files below
- 3030 Thread M5 Nut by BensHacks- https://www.thingiverse.com/thing:3998406
If you are looking for a raspberry pi 4 case, I added some holes to the Raspberry Pi 4 Case - Slider Case by dtnavida:
https://www.thingiverse.com/thing:3779674
You should be able to use the RPI 4 Slider case along with the stl of 3030 threaded M5 and 2 M5 x10mm bolts. Note: I do not have a rpi4 to test this with but if you have success with the print please comment.
Print instructions
I printed this in 0.15 layer height, no supports and on the mini with the provided gcode. Note: If you have a pi 4 please see STL files.
Or you can use the STLs to customize the print to your liking. You will need to print each part plus 2 of M5 threaded nuts.