Thonet Chair 209 - Thermoformed 1:6 Scale Model - All Parts and Forms
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A precise, thermoformed and true-scale interpretation of the classic Thonet 209 with original-inspired joinery.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 20
- Makes
- 0
- Views
- 259
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The Chair 209, a design classic, continues to be manufactured using traditional craftsmanship by the family-owned company Thonet. Its characteristic, elaborately bent wooden components are created by steaming different types of wood and then bending them into precise forms.
This model consciously translates that manufacturing process into additive production: the curved elements are also thermoformed and pressed into shape, not only to reflect the aesthetics of the original but also to illustrate the logic of its construction. At the same time, this method significantly increases the stability of the printed parts.
The joinery techniques are largely inspired by the original (with the exception of the backrest). All dimensions were transferred from the 1:1 scale and carefully optimized for 3D printing production.
Special attention was given to material orientation:
The filament direction follows the grain direction of the wood, mirroring both the structural logic and the material behavior of the original piece.
The result is a precise and construction-driven interpretation of a design icon — positioned between traditional craftsmanship and contemporary fabrication.
Instruction Steps
Print all parts, forms, and tools.
Forming the back & armrest:
Boil some water. Hold both ends of one back & armrest part and dip one round end into the hot water. Wait a few seconds until the material softens. Take it out and place it into the form, making sure the lines on the part align with the lines on the form. Press and guide it carefully into shape.
Now hold only one end, dip the other end into the water, and repeat the forming process. Do the same on the other side.Repeat these steps for the rear legs & backrest part.
Leave the part in the form and insert the drill guide. Drill about 2–3 mm into the legs.
Take the main frame and place it on a flat surface with the holes facing upwards. Insert the legs.
Insert the drilling template for the front legs. Using a 2 mm drill bit, drill about 2–3 mm into the legs.Remove the legs and place them on a flat surface with the drilled holes facing upwards.
Position the back & armrest around the main frame and drill 2–3 mm into the back & armrest through the two holes on both sides.Drill through the holes of the connection ring as well so they have the correct diameter.
Take a piece of filament and heat one end with a lighter. Push it into one of the drilled holes and wait a few seconds until it cools down. Cut it so that at least 5 mm remains sticking out. Repeat this for all drilled holes.
Assemble the chair as shown in the pictures.
If everything fits properly, start with one of the protruding filament pins. Cut it so that about 1–1.5 mm remains. Heat the end with a lighter and press it down using a flat metal tool, such as a flat screwdriver or knife, to flatten it.
Alternatively, you can use the flat tip of a soldering iron to press down and secure the filament.Repeat this step for all remaining filament pins.
To connect both parts of the backrest, push them together and carefully pull the tip of a soldering iron through the gap from one side to the other. Hold briefly to allow the material to fuse and cool. Repeat from the other side.
Insert the seat insert until it sits flush. If necessary, lightly sand the edges with sandpaper to ensure a proper fit.
If you would like to imitate the Vienna cane work (as shown on one of the models in the pictures), disable the top and bottom layers in your slicer, use around six perimeters, and set a 25% rectangular infill.
You’ve done it — congratulations!
You’ve just built a 1:6 scale model of the Thonet 209 chair.
Used Filament: Flax from Extrudr
-————————————
Der Stuhl 209, ein Designklassiker, wird nach wie vor im traditionellen Handwerk vom Familienunternehmen Thonet gefertigt. Seine charakteristischen, aufwendig gebogenen Holzelemente entstehen durch das Dämpfen verschiedener Hölzer und das anschließende Biegen in präzise Formen.
In diesem Modell wird dieser Herstellungsprozess bewusst aufgegriffen und in die additive Fertigung übertragen: Die gebogenen Elemente werden ebenfalls thermoformt und in Form gepresst, um nicht nur die Ästhetik des Originals nachzuempfinden, sondern auch die konstruktive Logik der Herstellung nachvollziehbar zu machen. Gleichzeitig erhöht dieses Verfahren die Stabilität der Bauteile deutlich.
Auch die Verbindungstechniken orientieren sich weitgehend am Original (mit Ausnahme der Rückenlehne). Sämtliche Maße wurden vom Maßstab 1:1 übertragen und sorgfältig für die Fertigung im 3D-Druck optimiert.
Besonderes Augenmerk liegt auf der Materialausrichtung:
Die Filamentrichtung entspricht der Faserrichtung des Holzes, wodurch sowohl die konstruktive Logik als auch das strukturelle Verhalten des Vorbilds nachvollzogen werden.
So entsteht eine präzise, konstruktiv gedachte Interpretation eines Klassikers – zwischen traditioneller Handwerkstechnik und zeitgenössischer Fertigung.
Anleitungsschritte
1.Drucke alle Teile, Formen und Werkzeuge.
2.Formen von Rückenlehne & Armlehne:
Bringe etwas Wasser zum Kochen. Halte beide Enden eines Rückenlehnen- & Armlehnenteils fest und tauche ein rundes Ende in das heiße Wasser. Warte einige Sekunden, bis das Material weich wird. Nimm es heraus und lege es in die Form. Achte darauf, dass die Linien am Bauteil mit den Linien in der Form übereinstimmen. Drücke und führe das Teil vorsichtig in die gewünschte Form.
Halte nun nur noch ein Ende fest, tauche das andere Ende ins Wasser und wiederhole den Formvorgang. Wiederhole dies auch auf der anderen Seite.
3.Wiederhole diese Schritte für das Bauteil der hinteren Beine & Rückenlehne.
4.Lasse das Teil in der Form und setze die Bohrschablone ein. Bohre etwa 2–3 mm tief in die Beine.
5.Lege den Hauptrahmen auf eine ebene Fläche, sodass die Bohrungen nach oben zeigen. Setze die Beine ein.
Setze die Bohrschablone für die Vorderbeine ein. Bohre mit einem 2-mm-Bohrer etwa 2–3 mm tief in die Beine.
6.Entferne die Beine und lege sie mit den gebohrten Löchern nach oben auf eine ebene Fläche.
Positioniere die Rückenlehne & Armlehne um den Hauptrahmen und bohre durch die beiden seitlichen Löcher jeweils 2–3 mm tief in das Bauteil.
7.Bohre auch durch die Löcher des Verbindungsrings, damit sie den korrekten Durchmesser erhalten.
8.Nimm ein Stück Filament und erhitze ein Ende mit einem Feuerzeug. Drücke es in eines der gebohrten Löcher und warte einige Sekunden, bis es abgekühlt ist. Schneide es so ab, dass mindestens 5 mm überstehen. Wiederhole dies für alle gebohrten Löcher.
9.Baue den Stuhl wie auf den Bildern gezeigt zusammen.
10.Wenn alles korrekt sitzt, beginne mit einem der überstehenden Filamentstifte. Kürze ihn so, dass etwa 1–1,5 mm stehen bleiben. Erhitze das Ende mit einem Feuerzeug und drücke es mit einem flachen Metallwerkzeug – beispielsweise einem Schlitzschraubendreher oder Messer – flach.
Alternativ kannst du auch die flache Spitze eines Lötkolbens verwenden, um das Filament niederzudrücken und zu fixieren.
11.Wiederhole diesen Schritt für alle verbleibenden Filamentstifte.
12.Um beide Teile der Rückenlehne zu verbinden, stecke sie zusammen und ziehe vorsichtig die Spitze eines Lötkolbens von einer Seite durch den Spalt zur anderen. Halte kurz inne, damit das Material verschmilzt und abkühlen kann. Wiederhole den Vorgang von der anderen Seite.
13.Setze den Sitzeinsatz ein, bis er bündig sitzt. Falls nötig, schleife die Kanten leicht mit Schleifpapier nach, um eine passgenaue Verbindung zu gewährleisten.
14.Wenn du das Wiener Geflecht (wie auf einem der Modelle auf den Bildern zu sehen) nachbilden möchtest, deaktiviere im Slicer die Top- und Bottom-Layer, verwende etwa sechs Perimeter und stelle ein rechteckiges Infill von 25 % ein.
⸻
Geschafft — herzlichen Glückwunsch!
Du hast soeben ein Modell des Thonet 209 Stuhls im Maßstab 1:6 gebaut.
Verwendetes Filament: Flax von Extrudr