1 / 1
Gamecube Controller Front Shell
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- GNU General Public License v3.0
UPDATE COMING SOON (Did some experimenting with a 3d scanner back shell and found that the screwpost on the backside of the front shell by the dpad was too wide for the shell. I'm gonna do some experimenting with this and figure out the best way to make this work)
Hardware required: 6 wood screws (#4 4-32x3/8") or you can just super glue it but that kinda defeats the purpose of the screws and mess with alignment of the buttons.
Print with 40% infill with at least 5 walls and lay each piece flat
Used Orca-Flashforge
Further instructions are in the TXT file linked in Other Files, SERIOUSLY, READ IT, IT HELPS BIG TIME